Getting To Know More About Speakers And Seleting The Right One
April 18, 2011Speaker cables are available in a wide range and cable you choose will greatly affect the quality of your speakers. There are also different speaker cables for a regular stereo and home theatre setup. There is also a great difference between cables for floor speakers and bookshelves.
Home theatre systems will most likely require longer cables than for regular music setups that you usually see around electronics. The longer a cable runs the more likely it will have a loss of sound quality due to the impedance from the long length.
To apply this, look at the longer cables with lower resistance and RFI (Radio Frequency Interference) cancelling to have the best sound possible.
There are several factors to be considered in using the right speaker cables for any given system that you are trying to use. Speaker impedance should be taken in consideration in the use of speaker cables. If you do not take care of this, there is a good chance your speakers simply will not even work properly.
Characteristically speaking, speakers usually have an impedance rating of 2, 4, 8 or 16 ohms and this can typically be found somewhere on the speaker (most likely, but not always, on the back). The unit of measure used for speaker impedance is an ohm. It is just on rare occasions but normally the speakers should come with some form or leaflet that will have the information listed.
After finding the speaker impedance, then establish the correct connector for the cables. Then check the speaker itself to find the connection ports, this will help you to find out the variety of speaker cable you need.
There are connectors called banana plugs which are single or dual, others could be single prong which will be an eight inch or quarter inch size cable or a three point connector which is usually red, yellow and white.
After establishing the type of the connector and the impedance rating, you can now proceed with choosing the required length of the cable. You can possible estimate the distance, take measurements if you want, the length needed to connect the speakers to components in addition to other reflections.
Besides shopping guide, this author also regularly shares knowledge on speaker wiring and rca.
Leave a Reply